I love how easy it is to spot a diox thread from the title.
The personification of dunning-Kruger.
if you rupture'd diox what would he do?
A. run until he died
B. act like its a 10 second stun
C. tp (by tp i mean make a thread about how op bs is not actually tp)
EditWatch this pageRead in another language
McLaren F1
For the Formula One team, see McLaren.
McLaren F1
Overview
Manufacturer McLaren Automotive
Production 1992–1999[1] (106 cars)
Assembly Woking, Surrey, England
Designer Gordon Murray & Peter Stevens
Body and chassis
Class Sports car (S)
Body style 2-door coupé
Layout Rear mid-engine, rear-wheel-drive
Doors 2
Related McLaren F1 GTR
Powertrain
Engine 6.1 L BMW S70/2 V12
Transmission 6-speed manual
Dimensions
Wheelbase 2,718 mm (107.0 in)
Length 4,287 mm (168.8 in)
Width 1,820 mm (71.7 in)
Height 1,140 mm (44.9 in)
Curb weight 1,138 kg (2,509 lb)
Chronology
Successor McLaren P1
The McLaren F1 is a sports car designed and manufactured by McLaren Cars. Originally a concept conceived by Gordon Murray, he convinced Ron Dennis to back the project and engaged Peter Stevens to design the exterior and interior of the car. On 31 March 1998, the XP5 prototype set the record for the world's fastest production car, reaching 240.1 mph (386.4 km/h) with the rev limiter removed surpassing the 231 mph (372 km/h) reached with the XP3 prototype. The F1 surpassed the RUF CTR2's 217 mph record from 1995, and also surpassed the XJ220's 213 mph record from 1992. However, the Bugatti Veyron 16.4 beat it in 2005 with a top speed of 253.81 mph (408.47 km/h).[2]
The car features numerous proprietary designs and technologies; it is lighter and has a more streamlined structure than many modern sports cars, despite having one seat more than most similar sports cars, with the driver's seat located in the centre (and slightly forward) of two passengers' seating positions, providing driver visibility superior to that of a conventional seating layout. It features a powerful engine and is somewhat track oriented, but not to the degree that it compromises everyday usability and comfort. It was conceived as an exercise in creating what its designers hoped would be considered the ultimate road car. Despite not having been designed as a track machine, a modified race car edition of the vehicle won several races, including the 24 Hours of Le Mans in 1995, where it faced purpose-built prototype race cars. Production began in 1992 and ended in 1998. In all, 106 cars were manufactured, with some variations in the design.[3]
In 1994, the British car magazine Autocar stated in a road test regarding the F1, "The McLaren F1 is the finest driving machine yet built for the public road." They further stated, "The F1 will be remembered as one of the great events in the history of the car, and it may possibly be the fastest production road car the world will ever see."[4] In 2005, Channel4 placed the car at number one on their list of the 100 greatest cars, calling it "the greatest automotive achievement of all time".[5] Notable past and present McLaren F1 owners include Elon Musk,[6] Jay Leno,[7] and the Sultan of Brunei.[8]
Design and implementation Edit
The logo of McLaren F1
McLaren F1
Chief engineer Gordon Murray's design concept was a common one among designers of high-performance cars: low weight and high power. This was achieved through use of high-tech and expensive materials such as carbon fibre, titanium, gold, magnesium and kevlar. The F1 was the first production car to use a carbon-fibre monocoque chassis.[9]
The three seat setup inside an F1
Gordon Murray had been thinking of a three-seat sports car since his youth. When Murray was waiting for a flight home from the Italian Grand Prix in 1988, he drew a sketch of a three-seater sports car and proposed it to Ron Dennis. He pitched the idea of creating the ultimate road car, a concept that would be heavily influenced by the company's Formula One experience and technology and thus reflect that skill and knowledge through the McLaren F1.
Murray declared that "During this time, we were able to visit with Ayrton Senna and Honda's Tochigi Research Center. The visit related to the fact that at the time, McLaren's F1 Grand Prix cars were using Honda engines. Although it's true I had thought it would have been better to put a larger engine, the moment I drove the Honda NSX, all the benchmark cars—Ferrari, Porsche, Lamborghini—I had been using as references in the development of my car vanished from my mind. Of course the car we would create, the McLaren F1, needed to be faster than the NSX, but the NSX's ride quality and handling would become our new design target. Being a fan of Honda engines, I later went to Honda's Tochigi Research Center on two occasions and requested that they consider building for the McLaren F1 a 4.5 litre V10 or V12. I asked, I tried to persuade them, but in the end could not convince them to do it, and the McLaren F1 ended up equipped with a BMW engine."[10]
Later, a pair of Ultima MK3 kit cars, chassis numbers 12 and 13, "Albert" and "Edward", the last two MK3s, were used as "mules" to test various components and concepts before the first cars were built. Number 12 was used to test the gearbox with a 7.4 litre Chevrolet V8, plus various other components such as the seats and the brakes. Number 13 was the test of the V12, plus exhaust and cooling system. When McLaren was done with the cars they destroyed both of them to keep away the specialist magazines and because they did not want the car to be associated with "kit cars".[citation needed]
The car was first unveiled at a launch show, 28 May 1992, at The Sporting Club in Monaco. The production version remained the same as the original prototype (XP1) except for the wing mirror which, on the XP1, was mounted at the top of the A-pillar. This car was deemed not road legal as it had no indicators at the front; McLaren was forced to make changes on the car as a result (some cars, including Ralph Lauren's, were sent back to McLaren and fitted with the prototype mirrors). The original wing mirrors also incorporated a pair of indicators which other car manufacturers would adopt several years later.
The car's safety levels were first proved when during a testing in Namibia in April 1993, a test driver wearing just shorts and a T-shirt hit a rock and rolled the first prototype car several times. The driver managed to escape unscathed. Later in the year, the second prototype (XP2) was specially built for crashtesting and passed with the front wheel arch untouched.
Engine Edit
History Edit
The McLaren F1's engine compartment contains the mid-mounted BMW S70/2 engine and uses gold foil as a heat shield in the exhaust compartment
Gordon Murray insisted that the engine for this car be naturally aspirated to increase reliability and driver control. Turbochargers and superchargers increase power but they increase complexity and can decrease reliability as well as introducing an additional aspect of latency and loss of feedback. The ability of the driver to maintain maximum control of the engine is thus compromised. Murray initially approached Honda for a powerplant with 550 bhp (410 kW; 558 PS), 600 mm (23.6 in) block length and a total weight of 250 kg (551 lb), it should be derived from the Formula One powerplant in the then-dominating McLaren/Honda cars. When Honda refused, Isuzu, then planning an entry into Formula One, had a 3.5-litre V12 engine being tested in a Lotus chassis. The company was very interested in having the engine fitted into the F1. However, the designers wanted an engine with a proven design and a racing pedigree.[11]
Specifications Edit
Gordon Murray then approached BMW, which took an interest, and the motorsport division BMW M headed by engine expert Paul Rosche[12] designed and built Murray a 6.1 L (6,064 cc) 60-degree V12 engine called the BMW S70/2.[13] At 627 PS (461 kW; 618 hp)[14][15][16] and 266 kg (586 lb) the BMW engine ended up 14% more powerful and 16 kg (35 lb) heavier than Gordon Murray's original specifications, with the same block length. It has an aluminium alloy block and heads, with 86 mm (3.4 in) x 87 mm (3.4 in) bore/stroke, quad overhead camshafts with variable valve-timing (a relatively new and unproven technology for the time) for maximum flexibility of control over the four valves per cylinder, and a chain drive for the camshafts for maximum reliability. The engine uses a dry sump oil lubrication system. The carbon fibre body panels and monocoque required significant heat insulation in the engine compartment, so Murray's solution was to line the engine bay with a highly efficient heat-reflector: gold foil. Approximately 16 g (0.8 ounce) of gold was used in each car.[17] The road version used a compression ratio of 11:1 to produce 627 hp (468 kW; 636 PS)[13] at 7400 rpm and torque output of 480 lb·ft (651 N·m) at 5600 rpm.[18] The engine has a redline rev limiter set at 7500 rpm. In contrast to raw engine power, a car's power-to-weight ratio is a better method of quantifying acceleration performance than the peak output of the vehicle's powerplant. The standard F1 achieves 550 hp/ton (403 kW/tonne), or just 3.6 lb/hp. The cam carriers, covers, oil sump, dry sump, and housings for the camshaft control are made of magnesium castings. The intake control features twelve individual butterfly valves and the exhaust system has four Inconel catalysts with individual Lambda-Sondion controls. The camshafts are continuously variable for increased performance, using a system very closely based on BMW's VANOS variable timing system for the BMW M3;[19] it is a hydraulically actuated phasing mechanism which retards the inlet cam relative to the exhaust cam at low revs, which reduces the valve overlap and provides for increased idle stability and increased low-speed torque. At higher rpm the valve overlap is increased by computer control to 42 degrees (compare 25 degrees on the M3)[19] for increased airflow into the cylinders and thus increased performance. To allow the fuel to atomise fully, the engine uses two Lucas injectors per cylinder, with the first injector located close to the inlet valve – operating at low engine rpm – while the second is located higher up the inlet tract – operating at higher rpm. The dynamic transition between the two devices is controlled by the engine computer.[19] Each cylinder has its own miniature ignition coil. The closed-loop fuel injection is sequential. The engine has no knock sensor as the predicted combustion conditions would not cause this to be a problem. The pistons are forged in aluminium. Every cylinder bore has a nikasil coating giving it a high degree of wear resistance.[19] From 1998 to 2000, the Le Mans–winning BMW V12 LMR sports car used a similar S70/2 engine. The engine was given a short development time, causing the BMW design team to use only trusted technology from prior design and implementation experience. The engine does not use titanium valves or connecting rods. Variable intake geometry was considered but rejected on grounds of unnecessary complication.[19] As for fuel consumption, the engine achieves on average 15.2 mpg (15 L/100 km), at worst 9.3 mpg (25 L/100 km) and at best 23.4 mpg (10 L/100 km).[4]
Standard McLaren F1 with all user accessible compartments opened
Chassis and body Edit
The McLaren F1 was the first production road car to use a complete carbon fibre reinforced polymer (CFRP) monocoque chassis structure.[20] Aluminium and magnesium were used for attachment points for the suspension system, inserted directly into the CFRP.[21]
The car features a central driving position – the driver's seat is located in the middle, ahead of the fuel tank and ahead of the engine, with a passenger seat slightly behind and on each side.[22] The doors on the vehicle move up and out when opened, and are thus of the butterfly type, also called Dihedral doors. Gordon Murray's design for the doors was inspired by a Toyota Sera.[23]
The engine produces high temperatures under full application and thus causes a high temperature variation in the engine bay from no operation to normal and full operation. CFRP becomes mechanically stressed over time from high heat transfer effects and thus the engine bay was not constructed from CFRP.[24]
Aerodynamics Edit
The overall drag coefficient on the standard McLaren F1 is 0.32,[25] compared with 0.36 for the faster Bugatti Veyron, and 0.357 for the SSC Ultimate Aero TT, which was the fastest production car from 2007 to 2010. The vehicle's frontal area is 1.79 square metres, and the S·Cd figure is 0.57. Because the machine features active aerodynamics[13][17][26] these are the figures presented in the most streamlined configuration.
The normal McLaren F1 features no wings to produce downforce (compare the LM and GTR editions); however, the overall design of the underbody of the McLaren F1 in addition to a rear diffuser exploits ground effect to improve downforce which is increased through the use of two electric Kevlar fans to further decrease the pressure under the car.[27] A "high downforce mode" can be turned on and off by the driver.[27] At the top of the vehicle, there is an air intake to direct high pressure air to the engine with a low pressure exit point at the top of the very rear.[27] Under each door is a small air intake to provide cooling for the oil tank and some of the electronics.[27] The airflow created by the electric fans not only increases downforce, but the airflow that is created is further exploited through design, by being directed through the engine bay to provide additional cooling for the engine and the ECU.[27] At the front, there are ducts assisted by a Kevlar electric suction fan for cooling of the front brakes.[27]
There is a small dynamic rear spoiler on the tail of the vehicle, which will adjust dynamically and automatically attempt to balance the centre of gravity of the car under braking[17] – which will be shifted forward when the brakes are applied. Upon activation of the spoiler, a high pressure zone is created in front of the flap, and this high pressure zone is exploited—two air intakes are revealed upon application that will allow the high pressure airflow to enter ducts that route air to aid in cooling the rear brakes.[27] The spoiler increases the overall drag coefficient from 0.32 to 0.39 and is activated at speeds equal to or above 40 mph (64 km/h) by brake line pressure.[19]
Suspension Edit
Steve Randle, who was the car's dynamicist, was appointed responsible for the design of the suspension system of the McLaren F1 machine.[19] It was decided that the ride should be comfortable yet performance-oriented, but not as stiff and low as that of a true track machine, as that would imply reduction in practical use and comfort as well as increasing noise and vibration, which would be a contradictory design choice in relation to the former set premise – the goal of creating the ultimate road car.
From inception, the design of the F1 vehicle had strong focus on centering the mass of the car as near the middle as possible by extensive manipulation of placement of, inter alia, the engine, fuel and driver, allowing for a low polar moment of inertia in yaw. The F1 has 42% of its weight at the front and 58% at the rear,[19] this figure changes less than 1% with the fuel load.
The distance between the mass centroid of the car and the suspension roll centre were designed to be the same front and rear to avoid unwanted weight transfer effects. Computer controlled dynamic suspension were considered but not applied due to the inherent increase in weight, increased complexity and loss of predictability of the vehicle.
Damper and spring specifications: 90 mm (3.5 in) bump, 80 mm (3.1 in) rebound with bounce frequency at 1.43 Hz at front and 1.80 Hz at the rear.[19] Despite being sports oriented, these figures imply a soft ride and inherently decrease track performance. As can be seen from the McLaren F1 LM, McLaren F1 GTR et al., the track performance potential is much higher than that in the stock F1 due to fact that car should be comfortable and usable in everyday conditions.
The suspension is a double wishbone system with an unusual design. Longitudinal wheel compliance is included without loss of wheel control, which allows the wheel to travel backwards when it hits a bump – increasing the comfort of the ride.
Castor wind-off at the front during braking is handled by McLaren's proprietary Ground Plane Shear Centre – the wishbones on either side in the subframe are fixed in rigid plane bearings and connected to the body by four independent bushes which are 25 times more stiff radially than axially.[19] This solution provides for a castor wind-off measured to 1.02 degrees per g of braking deceleration. Compare the Honda NSX at 2.91 degrees per g, the Porsche 928 S at 3.60 degrees per g and the Jaguar XJ6 at 4.30 degrees per g respectively. The difference in toe and camber values are also of very small under lateral force application. Inclined Shear Axis is used at the rear of the machine provides measurements of 0.04 degrees per g of change in toe-in under braking and 0.08 degrees per g of toe-out under traction.[19]
When developing the suspension system the facility of electro-hydraulic kinematics and compliance at Anthony Best Dynamics was employed to measure the performance of the suspension on a Jaguar XJR16, a Porsche 928S and a Honda NSX to use as references.
Steering knuckles and the top wishbone/bell crank are also specially manufactured in an aluminium alloy. The wishbones are machined from a solid aluminium alloy with CNC machines.[19]
Tyres Edit
The McLaren F1 uses 235/45ZR17 front tyres and 315/45ZR17 rear tyres.[13] These are specially designed and developed solely for the McLaren F1 by Goodyear and Michelin. The tyres are mounted on 17-by-9-inch (430 mm × 230 mm) front, and 17-by-11.5-inch (430 mm × 290 mm) rear five-spoke cast magnesium wheels, coated with a protective paint and secured by magnesium retention pins.[22]
The turning circle from kerb to kerb is 13 m (43 ft), allowing the driver 2 turns from lock to lock.
Brakes Edit
The F1 features unassisted, vented and cross-drilled brake discs made by Brembo. Front size is 332 mm (13.1 in) and at the rear 305 mm (12.0 in).[13][19] The calipers are all four-pot, opposed piston types, and are made of aluminium.[19] The rear brake calipers do not feature any handbrake functionality, however there is a mechanically actuated, fist-type caliper which is computer controlled and thus serves as a handbrake.
To increase caliper stiffness, the calipers are machined from one single solid piece (in contrast to the more common being bolted together from two halves). Pedal travel is slightly over one inch. Activation of the rear spoiler will allow the air pressure generated at the back of the vehicle to force air into the cooling ducts located at either end of the spoiler which become uncovered upon application of it.
Servo-assisted ABS brakes were ruled out as they would imply increased mass, complexity and reduced brake feel; however at the cost of increasing the required skill of the driver.[19]
Gordon Murray attempted to utilise carbon brakes for the F1, but found the technology not mature enough at the time;[24] with one of the major culprits being that of a proportional relationship between brake disc temperature and friction—i.e. stopping power—thus resulting in relatively poor brake performance without an initial warm-up of the brakes before use.[28] Since carbon brakes have a more simplified application envelope in pure racing environments, this allows for the racing edition of the machine, the F1 GTR, to feature ceramic carbon brakes.[12]
Gearbox and powertrain Edit
The standard McLaren F1 has a transverse 6-speed manual gearbox with an AP carbon triple-plate clutch[13] contained in an aluminium housing. The second generation GTR edition has a magnesium housing.[12] Both the standard edition and the 'McLaren F1 LM' have the following gear ratios: 3.23:1, 2.19:1, 1.71:1, 1.39:1, 1.16:1, 0.93:1, with a final drive of 2.37:1, the final gear is offset from the side of the clutch.[13] The gearbox is proprietary and was developed by Weismann.[29] The Torsen LSD (Limited Slip Differential) has a 40% lock.[13]
The McLaren F1 has an aluminium flywheel that has only the dimensions and mass absolutely needed to allow the torque from the engine to be transmitted. This is done in order to decrease rotational inertia and increase responsiveness of the system, resulting in faster gear changes and better throttle feedback. This is possible due to the F1 engine lacking secondary vibrational couples and featuring a torsional vibration damper by BMW.[19]
Interior and equipment Edit
1996 McLaren F1 side luggage compartment
Standard equipment on the stock McLaren F1 includes full cabin air conditioning, a rarity on most sports cars and a system design which Murray again credited to the Honda NSX, a car he had owned and driven himself for 7 years without, according to the official F1 website, ever needing to change the AC automatic setting. Further comfort features included SeKurit electric defrost/demist windscreen and side glass, electric window lifts, remote central locking, Kenwood 10-disc CD stereo system, cabin access release for opening panels, cabin storage compartment, four-lamp high performance headlight system, rear fog and reversing lights, courtesy lights in all compartments, map reading lights and a gold-plated Facom titanium tool kit and first aid kit (both stored in the car).[30] In addition, tailored, proprietary luggage bags specially designed to fit the vehicle's carpeted storage compartments, including a tailored golf bag, were standard equipment.[22] Airbags are not present in the car.[4][12] Each customer was given a special edition TAG Heuer 6000 Chronometer wristwatch with its serial number scripted below the centre stem.[31]
All features of the F1 were, according to Gordon Murray, obsessed over including the interior.[24] The metal plates fitted to improve aesthetics of the cockpit are claimed to be 20 thousandths of an inch (0.5 mm) thick to save weight.[24] The driver's seat of the McLaren F1 is custom fitted to the specifications desired by the customer for optimal fit and comfort; the seats are handmade from CFRP and covered in light Connolly leather.[22] By design, the F1 steering column cannot be adjusted; however, prior to production each customer specifies the exact preferred position of the steering wheel and thus the steering column is tailored by default to those owner settings. The same holds true for the pedals, which are not adjustable after the car has left the factory, but are tailored to each specific customer.[4]
During its pre-production stage, McLaren commissioned Kenwood, the team's supplier of radio equipment, to create a lightweight car audio system for the car; Kenwood, between 1992 and 1998 used the F1 to promote its products in print advertisements, calendars and brochure covers. Each car's audio system was especially designed to tailor to an individual's listening taste, however radio was omitted because Murray never listened to the radio.
Purchase and maintenance Edit
Only 106 cars were manufactured: 5 prototypes (XP1, XP2, XP3, XP4, XP5), 64 road versions (F1), 1 tuned prototype (XP1 LM), 5 tuned versions (LM), 1 longtail prototype (XPGT), 2 longtail versions (GT), and 28 racecars (GTR). Production began in 1992 and ended in 1998.[3] At the time of production each machine took around three and a half months to make.[4]
Although production stopped in 1998, McLaren still maintains an extensive support and service network for the F1. Every standard F1 has a modem which allows customer care to remotely fetch information from the ECU of the car in order to assist the customer in the event of a mechanical vehicle failure.[32] There are eight[33] authorised service centres throughout the world, and McLaren will on occasion fly a specialised technician to the owner of the car or the service centre. All of the technicians have undergone dedicated training in service of the McLaren F1. In cases where major structural damage has occurred, the car can be returned to McLaren directly for repair.[33]
Performance Edit
The F1 remains one of the fastest production cars ever made; as of July 2013 it is succeeded by very few cars, including the Koenigsegg Agera R,[34] the Bugatti Veyron,[2] the SSC Ultimate Aero TT,[35] the Hennessey Venom GT[36] and the Bugatti Veyron Super Sport. However, all of the higher top speed machines use forced induction to reach their respective top speeds, whereas the McLaren F1 is naturally aspirated.
Acceleration Edit
0–30 mph (48 km/h): 1.8 s[37]
0–40 mph (64 km/h): 2.3 s[37]
0–50 mph (80 km/h): 2.7 s[37]
0–60 mph (97 km/h): 3.2 s[37]
0–70 mph (113 km/h): 3.9 s[37]
0–80 mph (129 km/h): 4.5 s[37]
0–90 mph (145 km/h): 5.6 s[37]
0–100 mph (161 km/h): 6.3 s[37]
0–110 mph (177 km/h): 7.2 s[37]
0–120 mph (193 km/h): 9.2 s[37]
0–124.3 mph (200 km/h): 9.4 s[38]
0–130 mph (209 km/h): 10.4 s[37]
0–140 mph (225 km/h): 11.2 s[37]
0–150 mph (241 km/h): 12.8 s[37]
0–160 mph (257 km/h): 14.6 s[37]
0–170 mph (274 km/h): 17.2 s[37]
0–180 mph (290 km/h): 20.3 s[37]
0–190 mph (306 km/h): 23.8 s[37]
0–200 mph (322 km/h): 28 s[37]
30–50 mph (48–80 km/h): 1.8 s, using 3rd/4th gear[37]
30–70 mph (48–113 km/h): 2.1 s, using 3rd/4th gear[37]
40–60 mph (64–97 km/h): 2.3 s, using 4th/5th gear[37]
50–70 mph (80–113 km/h): 2.8 s, using 5th gear[37]
180–200 mph (290–322 km/h): 7.6 s, using 6th gear[37]
0–400 m (0.25 mi): 11.045 s at 138 mph (222 km/h)[39]
0–1,000 m (0.62 mi): 19.548 s at 276.41 km/h (171.75 mph)[39]
Braking and handling Edit
30–0 mph (48–0 km/h): 9.7 m / 31.83 ft[40]
50–0 mph (80–0 km/h): 25.2 m / 82.68 ft[40]
70–0 mph (112–0 km/h): 49 m / 162 ft[37]
Skidpad Lateral Acceleration: 1.2[41]–1.3g[11]
Track tests Edit
Tsukuba Circuit, time trial: 1:04.62 (Driven by Naoki Hattori in Best Motoring) on a hot lap with humid (92%) weather and some miss shifting.[42] Which means that lap time can be improved to 59s with ideal conditions and if miss shifts were corrected as said by Best Motoring (who tested it) on Facebook.[43]
Millbrook Proving Ground in Bedfordshire, 2-mile (3.2 km) banked circuit, top speed test: An average speed of 195.3 mph (314.3 km/h), with a maximum speed of 200.8 mph (323.2 km/h) (driven by Tiff Needell using the XP5 prototype).[44]
MIRA, 2.82-mile (4.54 km) banked circuit, top speed test: An average speed of 168 mph (270 km/h), with a maximum speed of 196.2 mph (315.8 km/h) (driven by Peter Taylor).[44]
Nurburgring Nordschleife Lap Time is 7:11 in 1996 by Mika Hakkinen on Mclaren F1 XP5 prototype version,it was beaten by a Radical SR8 in 2005. (627 PS, 1140 kg)[45][46][47][48]
Bedford Autodrome West Circuit Post 2006 Hot Lap: 1:21.20 done by Evo magazine on 10 January 2007 which was faster than a Ferrari Enzo lap of 1:21.30[49]
Estoril circuit lap is 1:55.9 in 1994 (4.36 km) configuration of the track with 3 people on board.[50][51]
Mclaren F1 XP4 prototype was tested by Tiff Needell on TopGear at Goodwood track.[52] He said that its handling was superb and precise. The car reaches same part of the GoodWood that is woodcote corner from 6:53 to 8:18 of the video so expect the laptime to be around 1:25 (it may vary as it is estimation from video).[52]
The 1st lap of Nurburgring was completed by Jonathan Palmer in XP4 prototype where he reached a maximum of 200 mph (322 km/h) in the track.[53]
Record claims
Motorsports
Variants
References
External links
Last edited 3 days ago by GreenC bot
®
Content is available under CC BY-SA 3.0 unless otherwise noted.
Terms of UsePrivacyDesktop
Tasaina
7 minutes ago
50% winrate noob. why wont you just go play lol i can kill bs using sniper even when rupture and i can duel him using lc you idiot. bs aint op anymore.
ignoring diox post is a good way of he leaving dont u think? if no one answer, no more questions!! from now, is forbbiden repost in diox post
yeah i agree with sarllo
the thing is the blatant idiocy of his words makes it irresistible for us to bash such a degenerate trying to spread cancer
Zaloguj się aby dodawać komentarze.
stupid stun it should be 1, 1.5, 2, 2.5 dragon knight can easily killed anyone using his ult with just a blight stone and orb of venom with damage item like shadow blade.